FE PETRO 2 Hp — dalğıc yanacaq turbin nasosu — seriyanın təsviri

Seriyanın təsviri

FE PETRO 2 Hp — dalğıc yanacaq turbin nasosu

FE PETRO 2 Hp seriyasına dəyişən və sabit sürətli variantlar daxildir. Teleskopik uzunluqlar çənə uyğunlaşdırmanı asanlaşdırır; AP və AG müxtəlif icraları göstərir. Ətraflı →

Model kodu (SKU)PN-FF-STPMVS2-VL1
Model
STPMVS2-VL1
Zavod sifariş kodu
STPMVS2-VL1
brend
FE PETRO / Franklin Electric
İcra forması
Dəyişən sürət
Güc
2 Hp
Uzunluq diapazonu
59" – 87"

Qiymət

sorğu əsasında

Qiymətləri və çatdırılma şərtlərini 1–2 gün ərzində öyrənmək üçün sorğu göndərin.

Sorğu göndərBizimlə əlaqə saxlayın
  • 20 brenddən çoxunun rəsmi dileri
  • Gürcüstan üzrə çatdırılma
  • 20 ildən çox təcrübə

Cədvəldə məlumatlarına basaraq modeli seçin.

Modellərin müqayisəsi

ModelGücUzunluq diapazonu
2 Hp59" – 87"
2 Hp90" – 151"
2 Hp122" – 213"
2 Hp59" – 87"
2 Hp90" – 151"
2 Hp122" – 213"
2 Hp59" – 87"
2 Hp90" – 151"
2 Hp122" – 213"
2 Hp63" – 91"
2 Hp94" – 154"
2 Hp126" – 217"
2 Hp63" – 91"
2 Hp94" – 154"
2 Hp126" – 217"
2 Hp63" – 91"
2 Hp94" – 154"
2 Hp126" – 217"
2 Hp63" – 92"
2 Hp94" – 155"
2 Hp126" – 218"
2 Hp63" – 91"
2 Hp94" – 154"
2 Hp126" – 217"
2 Hp63" – 92"
2 Hp94" – 155"
2 Hp126" – 218"
Zavod məhsuldarlıq əyrisi — 60 Hz
Zavod məhsuldarlıq əyrisi — 60 Hz

Əyri göstərilən tezlik və variant üçündür. 50 Hz məlumatına uyğun sənəddə baxın.

Quruluş, iş prinsipi və model seçimi

Ətraflı təsvir və istifadə

Sistemdə tətbiq və quraşdırma

Quraşdırılmış, qrup və komponent görünüşləri

Bir çəndə iki nasosReal zavod fotosunda çənin xidmət quyusunda iki nasos görünür. Ortaq xətt uyğun kollektor və razılaşdırılmış idarəetmə tələb edir.
Nasosun montaja hazırlanmasıŞəkildə tam uzunluqlu qovşaq, üst kollektor və montaj mühiti görünür. Kod, uzunluq və uyğunluq yerində yoxlanır.
Nasosun yeri və yanacaq yolu
MLD və razılaşdırılmış çoxnasos idarəetməsi

Nasosun yeri və yanacaq yolu

Sualtı PMA çənin içində yanacaqda, üst kollektor isə qaldırıcı boru üzərində xidmət quyusunda yerləşir. Təzyiqli çıxış dispenserlərə gedir, detektor xətti izləyir. Elektrik tənzimləyicisi ayrıca yerləşir və mayeyə salınmır. Sistem şəkli bütün avadanlığın bir dəstə daxil olması deyil.

Çənin ölçülməsi və dəyişən uzunluq

Dəyişən uzunluqlu STP-də çənin dibindən montaj yivinin üstünə qədər ölçülür. Təlimat nümunəsində alt boşluq və yivin girişini nəzərə alaraq 96″-dən 6″ çıxılır və 90″ alınır. Teleskopik hissə mühərrik naqilləri dartılmadan bərkidilir. Nümunə konkret çən və nasosun ölçülməsini əvəz etmir.

Bir neçə nasos niyə birləşdirilir

Kollektorla birləşdirilən nasoslar ortaq xətti təchiz edir. Düzgün seçilmiş sistem tələbat artdıqda əlavə nasosu qoşur, yükü bölür və xidmət üçün ehtiyat yaradır. Ümumi axın əyrilərdən, boru müqavimətindən və idarəetmə rejimindən asılıdır; tək nasos sayı ilə müəyyən edilmir.

MLD və razılaşdırılmış çoxnasos idarəetməsi

TB013 MLD sınağı zamanı yalnız bir aparıcı nasosun işləməsini tələb edir. Müstəqil işləyən iki detektor fərdi 3 gph əvəzinə təxminən 6 gph ümumi hədd yarada bilər. Sənəddə STP-SCI/SCIII, MagVFC, SPGC-220 və TPGC-380 üçün uyğun növbələmə/əsas-köməkçi rejimləri göstərilir. Sxem digər modellərə avtomatik aid deyil.

Qrup sistemində təzyiq və əks axın

TB013 təxminən 40 psi zavod boşaltma parametri olan uyğun STD klapanlar tələb edir. Əlavə ardıcıl əks klapanlar təzyiq boşalmasına mane olmamalıdır. Ayrı çənlərdə 40 psi-dən yüksək nasoslarla yanacaq digər çənə keçə bilər; sənəd bu hal üçün əlavə daşma idarəetməsi nəzərdə tutur.

İlk işəsalma və xidmət

Quraşdırmada elektrik enerjisi ayrılıb kilidlənir, torpaqlama və yanacağa uyğun kipləşdirmə yoxlanır. Hidravlik birləşmədən sonra hava çıxarılır, təzyiq, sızma və mühafizə yoxlanır. Çıxarılan hissələr zavod koduna uyğun əvəzlənir. Tam ardıcıllıq və konkret elektrik sxemi əlavə təlimatdadır.

Tam quraşdırma təlimatları və sxemlər

Tam montaj/xidmət ardıcıllığı, bağlantılar və təhlükəsizlik tələbləri üçün konkret modelin zavod təlimatına baxın.

Zavod video təlimatları

Sifon jiklyorunun təmizlənməsi və dəyişdirilməsi

Sifon jiklyorunun təmizlənməsi və dəyişdirilməsi

Videoya bax ↗
4″ nasosun əks klapanının dəyişdirilməsi

4″ nasosun əks klapanının dəyişdirilməsi

Videoya bax ↗
Tənzimləyici xəta kodları

Tənzimləyici xəta kodları

Videoya bax ↗
Sualtı yanacaq nasosunun quraşdırılması

Sualtı yanacaq nasosunun quraşdırılması

Videoya bax ↗
PMA nasos-mühərrik qovşağının dəyişdirilməsi

PMA nasos-mühərrik qovşağının dəyişdirilməsi

Videoya bax ↗
Nasos naqil qovşağının dəyişdirilməsi

Nasos naqil qovşağının dəyişdirilməsi

Videoya bax ↗
Elektrik birləşdiricisinin dəyişdirilməsi

Elektrik birləşdiricisinin dəyişdirilməsi

Videoya bax ↗

2 Hp sabit və dəyişən sürətli variantlar

2 Hp ailəsinə müxtəlif uzunluq, qidalanma və hidravlik variantlar daxildir. Sabit sürət, yüksək təzyiq və dəyişən sürət əyriləri bir-birini əvəz etmir. Zavod kodunu, gərginliyi, fazaları, 50/60 Hz-i və uzunluq aralığını müqayisə edin; əyri seçilən modelə uyğundur.

Quruluş və çənə uyğunlaşdırma

Qurğu üst kollektor, çən adapteri, 4″ qaldırıcı, kolon borusu, uzunluq muftası və aşağı PMA-dan ibarətdir. Əsas çıxış və detektor portu 2″ NPT, sınaq və sifon portları ¼″ NPT-dir. A/B ölçülərində çən diametri, basdırılma dərinliyi, adapterlər və alt boşluq nəzərə alınır.

Advanced Protection və MagShell seçimləri

Advanced Protection uyğun STPAG/IST variantlarında toz/E-coating örtüklərini paslanmayan klapan, bərkidici, boru və PMA gövdəsi ilə birləşdirir; çətin ULSD tətbiqləri də nəzərdə tutulur. 2/4 Hp MagShell mühərrik ətrafında axın sahəsini 45% artırır; bu, hər rejimdə axının 45% artması demək deyil.

Su və turşu qalıqlarının ayrılması

Əlavə Corrosion Control Water Separator nasos axını ilə dizel çəninin dibində vakuum yaradır. Su və turşu qalıqları qabda toplanır, yanacaq çənə qaytarılır. Dəyişən filtr elementi yoxdur; mənbə ildə 2–3 boşaltma göstərir. EVO konsolu dövrləri və səviyyəni nəzarətdə saxlaya bilər.

Havanın çıxarılması, filtrləmə və xidmət

Aktiv havaayırıcı və geri dönüş yolu yanacaq təchizatını dəstəkləyir. IFS toru çöküntünü tutur və dayanma zamanı kiçik əks axınla təmizlənir. Elektrik ayırıcısı və təzyiq boşaltma elementləri xidmət üçün nəzərdə tutulur. Funksiya və aksesuarların mövcudluğunu konkret komplektasiyada yoxlayın.

İdarəetmə və sızma nəzarəti

Tezlik tənzimləyicisi sürəti tələbatla dəyişir; sabit sürətli Guardian uyğun mühərriki yük nasazlıqlarından qoruyur. EVO/TPI uzaq status, çən prioritetləri və giriş tıxanması bildirişləri əlavə edir. Sızma üçün mexaniki və elektron detektorlar mövcuddur. İdarəetmə və detektor ayrıca seçilir.

Yanacaq qarışıqları və variant seçimi

Standart STP və Alcohol Grade STPAG/STPAP/IST/ISTAP variantlarının qarışıq təsdiqləri fərqlidir. Kataloq E10/B5 standart avadanlığını uyğun E85 və B20/B100 variantlarından ayırır. Həmçinin 20% MTBE/ETBE və ya 17% TAME, flüorkarbon elastomerlər göstərilir. Maksimum özlülük 15°C-də 70 SSU-dur. Uyğunluğu konkret kodla yoxlayın.

Zavod şəkilləri və detallar

Böyütmək üçün şəklə basın

Seriyanın ümumi görünüşü
Seriyanın ümumi görünüşü
Tələbata uyğun təchizat
Advanced Protection və MagShell seçimləri
EVO/TPI uzaqdan idarəetmə imkanları
Seriyanın ümumi görünüşü
Advanced Protection və MagShell seçimləri
Advanced Protection və MagShell seçimləri
Su və turşu qalıqlarının ayrılması
Filtrləmə və özünütəmizləmə
İdarəetmə və sızma nəzarəti
Tələbata uyğun təchizat
Sabit sürətli nasosun idarə edilməsi
Tələbata uyğun təchizat
Tələbata uyğun təchizat
Hidravlik sistemin imkanları
Hidravlik zərbə və enerji sərfi
EVO/TPI uzaqdan idarəetmə imkanları
Təyinat və iş prinsipi
Təyinat və iş prinsipi
Təyinat və iş prinsipi
Komponentlər və montaj ölçüləri
Zavod məhsuldarlıq diaqramı4 Inch Performance Chart - 2 Hp Variable Speed Pump Performance Chart
Zavod məhsuldarlıq diaqramı4 Inch Performance Chart - 2 Hp Fixed Speed Pump Performance Chart
Zavod məhsuldarlıq diaqramı4 Inch Performance Chart -2 Hp High Pressure Fixed Speed Pump Performance Chart
Zavod sifariş və yığım sxemi
STP mexaniki və kollektor hissələri
Bir çəndə iki nasos
Nasosun montaja hazırlanması
Nasosun yeri və yanacaq yolu
MLD və razılaşdırılmış çoxnasos idarəetməsi

Təsvirdə seriyanın ümumi və əlavə imkanları da verilib. Konkret modelin komplektasiyasını cədvəl və sənədlə yoxlayın.

Orijinal təsvir və tərkib — STPMVS2-VL1

İstehsalçı məlumatları (ingiliscə)

2 Hp Variable Speed Submersible Turbine Pumps

ModelSTPMVS2-VL1
Description2 Hp variable speed with MagShell®
Model Length Range NumberVL1
Model Length Range*59" – 87"
Seriya məlumatları və sənədləri — İstehsalçı məlumatları (ingiliscə)

1. Manhole

2. Leak Detector

3. Manifold

4. Containment Sump

5. 4" Riser

6. Tank Adapter

7. Tank Manway

8. Column Pipe

9. Variable Length Coupler

10. Pump Motor Assembly (PMA)

11. End bell

12. Line Test Port, ¼" NPT

13. Leak Detector Port, 2" NPT

14. Syphon Port, ¼" NPT

15. Tank Port, ¼" NPT

16. Riser Pipe, 4" NPT

17. Discharge Outlet, 2" NPT

Notes: 1. Effective tank diameter (ETD) = Inside tank diameter (to top of 4" bung), including tank manway and/or sump adapter.

2. Model length (A) = ETD plus riser length minus bottom clearance minus 1" thread engagement.

3. Riser length (B) = Bury depth (to top of tank) minus pump head clearance minus tank manway and/or minus sump adapter.

Variable SpeedWith faster fill times during peak hours and power savings during non-peak hours, variable speed submersible pumping systems allow you to maximize profits with consistent flow rates while mitigating operating expenses.

Biofuel Blend CompatibilityFE PETRO® pumps are UL listed with both UL79A (up to 85% Ethanol) and UL79B (up to 20% or 100% Biodiesel).

Advanced ProtectionStop corrosion in its tracks. Special powder-coated, e-coated, and stainless steel components defend your pump in the tank and in the sump from accelerated corrosion.

Turbine Pump InterfaceRemote enhanced pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.

Intake Filter ScreenAvoid system damage, pumping slowdowns, and reduce filter changes by keeping harmful tank debris, sediment, and corrosion from entering the pumping system with this factory-installed option.

MagShell®The patented stainless steel MagShell® is designed to maximize flow rate capabilities, potential throughput, and profits. By expanding the pump motor shell, the MagShell® increases the area for product flow by 45%.

Variable LengthThe patented telescoping pump shaft lets installers adjust the length of the pump onsite for the perfect fit.

Active Air EliminatorFE PETRO® STPs come standard with active air elimination, which eliminates air through the highest point in the pump head at all times when the pump is running, assuring air does not pass into discharge piping.

Safety and Ease of MaintenanceFE PETRO® STPs include a contractor electrical disconnect, which requires loosening only one bolt, allowing motor wiring to be disconnected without venting the dangerous tank vapors into the sump when servicing FE PETRO® submersible products.

Simple ServicingIf ever required, the pump can be easily removed from the tank by unthreading three bolts. There is no need to disconnect the syphon system or to remove the leak detector from the system to service the STP.

Manual Pressure ReliefAs a standard FE PETRO® feature, a vent screw is provided to bleed line pressure to zero when necessary. By turning this screw, product is diverted back to the tank, dropping line pressure to zero. This reduces fuel discharged into the sump manhole or dispenser pan during servicing, further protecting service technicians and the environment.

Outlast, Outperform with Franklin Electric InsideFE PETRO® STPs are powered by the legendary Franklin Electric motor and built for long term performance. Franklin Electric-powered submersible pumps provide maximum uptime and a proven track record in the fueling industry that spans more than four decades. They feature best-in-class flow rates and a long history of dependability.

Quality CertificationFranklin Fueling Systems is an ISO 9001 Certified Manufacturer.

Variable speed models are available in variable lengths only.

Fixed speed models are available in variable length and fixed length options.

Check valve: 2¾" (70mm) diameter fluorocarbon seal constructed with cast aluminum body and steel backing washer.

Pressure relief valve: available in four pressure relief settings, integral to check valve. Standard model relieves at 40 psi (2.8 bar) and resets above 35 psi (2.4 bar).

Syphon: venturi-type syphon primer supplied with every submersible. Syphon check valve and secondary syphon sold separately.

Air eliminator: every submersible includes a tank return path with one-way check valve to provide active air elimination.

Electrical disconnect: electrical yoke for positive contractor disconnect during service.

2 Hp, variable speed, two-stage centrifugal type pump motor with integral, automatic, thermal overload protection.

60 Hz Max. pressure: selectable operating pressure on MagVFC™ between 24 psi and 42 psi deadhead.

50 Hz Max. pressure: selectable operating pressure on EcoVFC™ between 1.65 bar and 2.90 bar deadhead.

Available with MagShell® which results in 45% increased flow area around motor.

2 Hp fixed speed, 3450 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection.

Standard pressure (M200, two-stage) model, max. pressure = 36 psi.

High pressure (HM200, three-stage) model, max. pressure = 45 psi.

Available with MagShell™ for 45% increased flow area around motor.

2 Hp fixed speed, 2875 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection.

Standard pressure (three-stage) model, max. pressure = 2.55 bar.

High pressure (four-stage) model, max. pressure = 3.03 bar.

Available with MagShell™ for 45% increased flow area around motor.

Max. liquid viscosity: 70 SSU at 60 °F (15 °C).

STP variable speed models are UL and cUL listed for fuel mixtures containing up to 10% ethanol, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.

STPAG (AG compatible) models are UL listed for fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.

All variable speed (non-AG) models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.

2 Hp fixed speed models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.

All wetted elastomers are made of a high grade, fluorocarbon compound.

STP Standard Submersible Turbine Pumps with Fixed or Variable Speed Pump Motor Assembly

UL79 for petroleum dispensing products intended for use with gasoline or gasoline/ethanol blends with nominal ethanol concentrations up to 10 percent (gasohol, E10), diesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 5 percent (B5), kerosene, or fuel oil.

20% MTBE, 20% ETBE or 17% TAME with gasoline.

STPAG, STPAP, IST, ISTAP Alcohol-Grade Compatible and Advanced Protection Fixed or Variable Speed Submersible Turbine Pumps

UL79A for gasoline and gasoline/ethanol blends with nominal ethanol concentrations up to 85 percent (E0 - E85) for products intended for use with gasoline or gasoline/ethanol blends with nominal ethanol concentrations up to 85 percent (E85).

20% MTBE, 20% ETBE or 17% TAME with gasoline.

UL79B for diesel fuel, biodiesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 20 percent (B20), kerosene, and fuel oil for products intended for use with diesel fuel, biodiesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 20 percent (B20), kerosene or fuel oil.

100% biodiesel.

Variable speed pumps can only be controlled by a MagVFC™ variable frequency controller.

VS2 models can operate with single- or three-phase incoming power supply to the MagVFC™.

Incoming power supply to the MagVFC™ can be 200-250 VAC, 50 or 60 Hz.

MagVFC™ outputs a three-phase, variable frequency signal, valid for FE PETRO® variable speed pumps only.

MagVFC™ max. line draw: 20 Amps.

Max motor draw: 7 Amps.

Variable speed pumps can only be controlled by a MagVFC™ or EcoVFC™ variable frequency controller.

VS2 models can operate with single-phase incoming power supply to the MagVFC™ or three-phase to EcoVFC™.

Incoming power supply to the MagVFC™ is 200-250 VAC, 50 Hz and 360-440 VAC, 50 Hz to the EcoVFC™.

MagVFC™ or EcoVFC™ outputs a three-phase, variable frequency signal, valid for FE PETRO® variable speed pumps only.

MagVFC™ or EcoVFC™ max. line draw: 20 Amps.

Max motor draw: VS2 7 Amps.

2 Hp fixed speed models require single-phase, 208-230 VAC, 60 Hz incoming power.

2 Hp fixed speed models incorporate a starting and running capacitor, with internal bleed resistor, rated 370 Volt, 40 microfarad.

SPGC-220 single-phase Guardian Controllers and STP-CBS single-phase control boxes are available for 2 hp pump control.

Max. motor draw: 12 Amps.

200B models require single-phase, 200-250 VAC, 50 Hz incoming power and 200C models require three-phase 380-415 VAC 50 Hz incoming power.

200B models incorporate a starting and running capacitor, with internal bleed resistor, rated 440 Volt, 40 microfarad.

SPGC-220 single-phase Guardian™ Series controllers and STP-CBBS single-phase control boxes are available for 200B pump control.

STP-SCIIIC three phase smart controller and STP-CBB3C three-phase magnetic starter are available for 200C contol.

Max. motor draw: 200B 10 Amps, 200C 5 Amps.

cULus listed.

Consult factory for applicable approvals.

For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.

For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.

For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.

2 Hp Variable Speed Submersible Turbine Pumps

ModelDescriptionModel Length Range NumberModel Length Range*
STPMVS2-VL12 Hp variable speed with MagShell®VL159" – 87"
STPMVS2-VL22 Hp variable speed with MagShell®VL290" – 151"
STPMVS2-VL32 Hp variable speed with MagShell®VL3122" – 213"

2 Hp Variable Speed Intelligent Submersible Turbine Pumps

ModelDescriptionModel Length Range NumberModel Length Range*
ISTM-12 Hp AG variable speed with MagShell®VL159" – 87"
ISTM-22 Hp AG variable speed with MagShell®VL290" – 151"
ISTM-32 Hp AG variable speed with MagShell®VL3122" – 213"
ISTAPM-12 Hp AG variable speed with Advanced Protection, and MagShell®VL159" – 87"
ISTAPM-22 Hp AG variable speed with Advanced Protection, and MagShell®VL290" – 151"
ISTAPM-32 Hp AG variable speed with Advanced Protection, and MagShell®VL3122" – 213"

Standard 2 Hp Fixed Speed Submersible Turbine Pumps

ModelDescriptionModel Length Range NumberModel Length Range*
STPM200-VL12 Hp fixed speed with MagShell®VL163" – 91"
STPM200-VL22 Hp fixed speed with MagShell®VL294" – 154"
STPM200-VL32 Hp fixed speed with MagShell®VL3126" – 217"
STPHM200-VL12 Hp high pressure fixed speed with MagShell®VL163" – 91"
STPHM200-VL22 Hp high pressure fixed speed with MagShell®VL294" – 154"
STPHM200-VL32 Hp high pressure fixed speed with MagShell®VL3126" – 217"

Alcohol-Gas (AG) 2 Hp Fixed Speed Submersible Turbine Pumps

ModelDescriptionModel Length Range NumberModel Length Range*
STPAGM200-VL12 Hp AG fixed speed with MagShell®VL163" – 91"
STPAGM200-VL22 Hp AG fixed speed with MagShell®VL294" – 154"
STPAGM200-VL32 Hp AG fixed speed with MagShell®VL3126" – 217"
STPAGHM200-VL12 Hp AG high pressure fixed speed with MagShell®VL163" – 92"
STPAGHM200-VL22 Hp AG high pressure fixed speed with MagShell®VL294" – 155"
STPAGHM200-VL32 Hp AG high pressure fixed speed with MagShell®VL3126" – 218"
STPAPM200-VL12 Hp fixed speed with Advanced Protection, and MagShell®VL163" – 91"
STPAPM200-VL22 Hp fixed speed with Advanced Protection, and MagShell®VL294" – 154"
STPAPM200-VL32 Hp fixed speed with Advanced Protection, and MagShell®VL3126" – 217"
STPAPHM200-VL12 Hp high pressure fixed speed with Advanced Protection, and MagShell®VL163" – 92"
STPAPHM200-VL22 Hp high pressure fixed speed with Advanced Protection, and MagShell®VL294" – 155"
STPAPHM200-VL32 Hp high pressure fixed speed with Advanced Protection, and MagShell®VL3126" – 218"

Factory Installed Options

ModelDescription
FFloating suction adapter, 1½" NPT female, must be factory installed
KIFS (intake filter screen) factory assembled to pump motor assembly
RModel R check valve, factory installed, for Veeder-Root® PLLD Line Leak

2 Hp fixed speed specific accessories - 60Hz

Model NumberDescription
400137908Syphon check valve, alcohol-gasoline compatible (when ordered with STP/IST)
5874202800MagVFC™, 2 Hp or 4 Hp Variable Frequency Controller, 220 V, one required per STP
400818921STP-CBS, single-phase control box, with switch and lockout, 120 Volt coil
402312931STP-DHI + SPGC-220 Guardian Series™ Single-Phase Controller bundle (220 Volt supply, 110 Volt hook)
402313921STP-DHI-CBS, combo DHI with factory-wired STP-CBS single-phase control box
402459931Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible
402507930Secondary syphon kit (when two syphon primes are required for one STP)
5800100220SPGC-220 Guardian Series™ Single-Phase Controller, 220 Volt
5800300100STP-DHI, dispenser hook isolation for 110 Volt dispenser handle switches, up to eight each

2 Hp fixed speed specific accessories - 50Hz

Model NumberDescription
400137937Syphon check valve, alcohol-gasoline compatible
400818922STP-CBBS, single-phase control box, with switch and lockout, 240 Volt coil
401220965STP-CBB3C, three-phase 380-415 VAC magnetic starter
402312932STP-DHIB + SPGC-220 Guardian Series™ Single-Phase Controller bundle (220 Volt supply, 240 Volt hook)
402313922STP-DHIB-CBBS, combo DHI with factory-wired STP-CBBS single-phase control box
402459931Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible
402507930Secondary syphon kit (when two syphon primes are required for one STP)
5800100220SPGC-220 Guardian Series™ Single-Phase Controller, 220 Volt
5800300200STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each

Intelligent submersible turbine pump specific accessories - 60Hz

Model NumberDescription
5874202800MagVFC™, 2 Hp or 4 Hp Variable Frequency Controller, 220 V, one required per STP
400137908Syphon check valve, alcohol-gasoline compatible (when ordered with STP/IST)
5800300100STP-DHI, dispenser hook isolation for 110 Volt dispenser handle switches, up to eight each
402459931Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible
402507930Secondary syphon kit (when two syphon primes are required for one STP)

Intelligent submersible turbine pump specific accessories - 50Hz

Model NumberDescription
5874202900EcoVFC™, 2 Hp or 4 Hp Variable Frequency Controller, 380 V, one required per STP
400137937Syphon check valve, alcohol-gasoline compatible
402459931Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible
402507930Secondary syphon kit (when two syphon primes are required for one STP)
5800300200STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each
Mənbə səhifəsi ↗ Franklin Electric Fueling Systems

Məhsul haqqında

Təsvir

FE PETRO 2 Hp seriyasına dəyişən və sabit sürətli variantlar daxildir. Teleskopik uzunluqlar çənə uyğunlaşdırmanı asanlaşdırır; AP və AG müxtəlif icraları göstərir. Dəqiq modeli seçin: sabit və dəyişən sürətli nasosların qidalanma və idarəetmə tələbləri fərqlidir.