FE PETRO 2 Hp — საწვავის ჩასაძირი ტურბინული ტუმბო - სერიის საერთო ფოტო

სერიის საერთო ფოტო

FE PETRO 2 Hp — საწვავის ჩასაძირი ტურბინული ტუმბო

FE PETRO 2 Hp სერია აერთიანებს სიხშირულ და ფიქსირებული სიჩქარის შესრულებებს. ტელესკოპური სიგრძის ვარიანტები მონტაჟისას რეზერვუარის ზომაზე მორგებას ამარტივებს; AP და AG აღნიშვნები კონკრეტულ შესრულებას განასხვავებს. სრულად →

მოდელის კოდი (SKU)PN-FF-STPMVS2-VL1
მოდელი
STPMVS2-VL1
ქარხნული შეკვეთის კოდი
STPMVS2-VL1
ბრენდი
FE PETRO / Franklin Electric
შესრულება
სიხშირული მართვა
სიმძლავრე
2 Hp
სიგრძის დიაპაზონი
59" – 87"

ფასი

მოთხოვნით

გამოგვიგზავნეთ მოთხოვნა - ფასი და მიწოდების პირობები 1-2 დღეში.

მოთხოვნის გაგზავნაჩვენთან დაკავშირება
  • ოფიციალური დილერი 20+ ბრენდისთვის
  • მიწოდება საქართველოში
  • 20+ წლის გამოცდილება

მოდელის ასარჩევად დააჭირეთ მის მონაცემებს ცხრილში.

მოდელების შედარება

მოდელისიმძლავრესიგრძის დიაპაზონი
2 Hp59" – 87"
2 Hp90" – 151"
2 Hp122" – 213"
2 Hp59" – 87"
2 Hp90" – 151"
2 Hp122" – 213"
2 Hp59" – 87"
2 Hp90" – 151"
2 Hp122" – 213"
2 Hp63" – 91"
2 Hp94" – 154"
2 Hp126" – 217"
2 Hp63" – 91"
2 Hp94" – 154"
2 Hp126" – 217"
2 Hp63" – 91"
2 Hp94" – 154"
2 Hp126" – 217"
2 Hp63" – 92"
2 Hp94" – 155"
2 Hp126" – 218"
2 Hp63" – 91"
2 Hp94" – 154"
2 Hp126" – 217"
2 Hp63" – 92"
2 Hp94" – 155"
2 Hp126" – 218"
ქარხნული წარმადობის მრუდი — 60 Hz
ქარხნული წარმადობის მრუდი — 60 Hz

ეს მრუდი ეკუთვნის მითითებულ სიხშირესა და შესრულებას. 50 Hz მონაცემები იხილეთ შესაბამის დოკუმენტში.

აგებულება, მუშაობის პრინციპი და მოდელის შერჩევა

დეტალური აღწერა და გამოყენება

გამოყენება სისტემაში და მონტაჟი

დაყენებული, ჯგუფური და კომპონენტების ხედები

ორი ტუმბო ერთ ავზზერეალური ქარხნული ფოტო აჩვენებს ორი ტუმბოს განლაგებას ავზის ტექნიკურ ჭაში. მათი საერთო ხაზზე მუშაობა შესაბამის კოლექტორსა და შეთანხმებულ მართვას საჭიროებს.
ტუმბოს მომზადება მონტაჟისთვისფოტოზე ნაჩვენებია ტუმბოს სრული სიგრძის კვანძი, ზედა კოლექტორი და სამონტაჟო გარემო. ადგილზე მოწმდება შეკვეთის კოდი, სიგრძე და თავსებადობა.
სად დგას ტუმბო და სად მიდის საწვავი
MLD და რამდენიმე ტუმბოს შეთანხმებული მართვა

სად დგას ტუმბო და სად მიდის საწვავი

ჩასაძირი PMA ავზის შიგნით, საწვავში მუშაობს, ზედა კოლექტორი კი ავზის ამწევ მილსა და ტექნიკურ ჭაშია განთავსებული. კოლექტორიდან წნევიანი ხაზი დისპენსერებისკენ მიდის; გაჟონვის დეტექტორი ამ ხაზს აკონტროლებს. კონტროლერი ცალკე ელექტრული მოწყობილობაა და არა ავზში ჩასაძირი ნაწილი. ფოტოზე მთელი სისტემის ჩვენება ყველა მოწყობილობის ერთ კომპლექტში ჩართულობას არ ნიშნავს.

ავზის გაზომვა და ცვლადი სიგრძის დაყენება

ცვლადი სიგრძის STP-ში ჯერ იზომება მანძილი ავზის ფსკერიდან სამონტაჟო ხრახნის ზედაპირამდე. ინსტრუქციის მაგალითში 96″-დან აკლდება 6″ და მიიღება 90″: ეს ითვალისწინებს ქვედა დაშორებასა და ხრახნის ჩასვლას. შემდეგ იფიქსირება ტელესკოპური სექცია და მოწმდება, რომ ძრავის მავთულები არ იჭიმება. ეს მაგალითი არ ცვლის კონკრეტული ავზისა და შეკვეთილი ტუმბოს გაზომვას.

რატომ აერთიანებენ რამდენიმე ტუმბოს

საერთო კოლექტორით შეერთებული ტუმბოები ერთ მიწოდების ხაზზე მუშაობს. სწორად შერჩეული სისტემა მოთხოვნის ზრდისას დამატებით ტუმბოს რთავს, ანაწილებს დატვირთვას და მომსახურებისას სარეზერვო შესაძლებლობას იძლევა. საერთო წარმადობა დამოკიდებულია თითოეული ტუმბოს მრუდზე, მილსადენის წინააღმდეგობასა და მართვის რეჟიმზე; მხოლოდ ტუმბოების რაოდენობით საბოლოო ნაკადი არ განისაზღვრება.

MLD და რამდენიმე ტუმბოს შეთანხმებული მართვა

TB013-ის სქემაში დეტექტორის ტესტის დროს მხოლოდ ერთი წამყვანი ტუმბო უნდა მუშაობდეს. ორი დამოუკიდებლად ჩართული MLD დაახლოებით 6 gph საერთო გაჟონვის ზღვარს შექმნის და ცალკეული დეტექტორის 3 gph დაცვას აღარ შეინარჩუნებს. დოკუმენტი პირდაპირ ასახელებს STP-SCI/SCIII, MagVFC, SPGC-220 და TPGC-380-ის შესაბამის მორიგეობის/ძირითადი-დამხმარე რეჟიმებს. სხვა მოდელზე ეს სქემა ავტომატურად არ ვრცელდება.

ჯგუფური სისტემის წნევა და უკუდინება

TB013 ჯგუფურ მონტაჟში მოითხოვს შესაბამის STD უკუსარქველებს, დაახლოებით 40 psi ქარხნული განმტვირთავი პარამეტრით. დამატებითი მიმდევრული უკუსარქველი წნევის დასაშვებ განტვირთვას არ უნდა უშლიდეს ხელს. 40 psi-ზე მაღალი წნევის ტუმბოებით სხვადასხვა ავზის შეერთებისას შესაძლებელია საწვავის სხვა ავზში გადასვლა; დოკუმენტი ამ შემთხვევისთვის ცალკე გადავსების საწინააღმდეგო მართვას ითვალისწინებს.

პირველი გაშვება და მომსახურება

მონტაჟისას სრულდება ელექტრული გამორთვა და ჩაკეტვა, დამიწებისა და საწვავთან თავსებადი დალუქვის შემოწმება. ჰიდრავლიკური შეერთებების შემდეგ სისტემიდან გამოიდევნება ჰაერი, მოწმდება წნევა, გაჟონვა და შესაბამისი დაცვის მუშაობა. ამოსაღები ნაწილის შეცვლა უნდა ემყარებოდეს მის ქარხნულ კოდს. სრული სამონტაჟო მიმდევრობა და კონკრეტული ელექტრული სქემა თანდართულ ინსტრუქციაშია მოცემული.

სრული სამონტაჟო ინსტრუქციები და სქემები

მონტაჟისა და მომსახურების სრული თანმიმდევრობა, შეერთებები და უსაფრთხოების მოთხოვნები იხილეთ კონკრეტული მოდელის ქარხნულ ინსტრუქციაში.

ქარხნული ვიდეოგზამკვლევები

სიფონის ჟიკლიორის გაწმენდა და შეცვლა

სიფონის ჟიკლიორის გაწმენდა და შეცვლა

ვიდეოს ნახვა ↗
4″ ტუმბოს უკუსარქვლის შეცვლა

4″ ტუმბოს უკუსარქვლის შეცვლა

ვიდეოს ნახვა ↗
კონტროლერის შეცდომის კოდები

კონტროლერის შეცდომის კოდები

ვიდეოს ნახვა ↗
ჩასაძირი საწვავის ტუმბოს მონტაჟი

ჩასაძირი საწვავის ტუმბოს მონტაჟი

ვიდეოს ნახვა ↗
PMA ტუმბო-ძრავის კვანძის შეცვლა

PMA ტუმბო-ძრავის კვანძის შეცვლა

ვიდეოს ნახვა ↗
ტუმბოს სადენის კვანძის შეცვლა

ტუმბოს სადენის კვანძის შეცვლა

ვიდეოს ნახვა ↗
ელექტრული შემაერთებლის შეცვლა

ელექტრული შემაერთებლის შეცვლა

ვიდეოს ნახვა ↗

2 Hp — ფიქსირებული და სიხშირული შესრულებები

2 Hp ოჯახში თავმოყრილია სხვადასხვა სიგრძის, კვებისა და ჰიდრავლიკური შესრულების ტუმბოები. ფიქსირებული სიჩქარის, მაღალი წნევის და სიხშირული მოდელების მრუდები ერთმანეთის შემცვლელი არ არის. მოდელის არჩევისას შეადარეთ ქარხნული კოდი, ძაბვა, ფაზები, 50/60 Hz და სიგრძის დიაპაზონი; შესაბამისი მრუდი არჩევანის მიხედვით იცვლება.

აგებულება და ავზზე მორგება

სისტემა შედგება ზედა კოლექტორისგან, ავზის ადაპტერისგან, 4″ ამწევი მილისგან, სვეტის მილისგან, სიგრძის მარეგულირებელი შეერთებისა და ქვედა PMA-სგან. ძირითად გამოსასვლელს აქვს 2″ NPT შეერთება, გაჟონვის დეტექტორის პორტს — 2″ NPT, ტესტისა და სიფონის პორტებს — ¼″ NPT. ნახაზზე მოცემული A/B ზომები ითვალისწინებს ავზის დიამეტრს, ჩაღრმავებას, ადაპტერსა და ქვედა დაშორებას.

Advanced Protection და MagShell — არჩევითი შესრულებები

Advanced Protection აერთიანებს ფხვნილოვან/E-coating საფარსა და უჟანგავ ელემენტებს: დამცავ სარქველს, სამაგრებს, ამწევ და სვეტის მილებს, PMA-ს გარსს. იგი გათვალისწინებულია STPAG/IST ტიპის შესაბამის შესრულებებში, მათ შორის ULSD-ისა და კოროზიულად რთული პირობებისთვის. 2/4 Hp-ის MagShell ზრდის ძრავის გარშემო გამტარ ფართობს 45%-ით — ეს ფართობის ზრდაა და არა ყველა რეჟიმში წარმადობის 45%-იანი გარანტია.

წყლისა და მჟავე ნარჩენების გამოყოფა

Corrosion Control Water Separator არის ცალკე სისტემური შესაძლებლობა: ტუმბოს ნაკადი ქმნის ვაკუუმს, რომელიც დიზელის ავზის ფსკერიდან წყლისა და მჟავე ნარჩენების ნარევს იღებს. საწვავი ავზში ბრუნდება, ნარჩენი გროვდება ჭურჭელში. შესაცვლელი ფილტრის ელემენტი არ აქვს; წყაროში მითითებულია მომსახურებისას წელიწადში 2–3 დაცლა. EVO კონსოლთან მუშაობისას შესაძლებელია ციკლისა და დონის მონიტორინგი.

ჰაერის გამოყოფა, ფილტრაცია და მომსახურება

აქტიური ჰაერგამომყოფი და ავზში დაბრუნების არხი ხელს უწყობს საწვავის უწყვეტ მიწოდებას. შემწოვი ბადე IFS აკავებს ნალექს; ტუმბოს გაჩერებისას მცირე უკუდინება ბადეს წმენდს. ელექტრული გამთიშველი და წნევის განმტვირთავი ელემენტები გათვალისწინებულია მომსახურებისთვის. ეს ფუნქციები და აქსესუარების ჩართულობა უნდა შემოწმდეს შეკვეთის კონკრეტულ კომპლექტაციაში.

მართვა და გაჟონვის მონიტორინგი

სიხშირული კონტროლერი მოთხოვნის მიხედვით ცვლის ბრუნვას; ფიქსირებული სიჩქარის Guardian იცავს შესაბამის ძრავს გადატვირთვისა და არასაკმარისი დატვირთვისგან. EVO/TPI კავშირი ამატებს დისტანციურ სტატუსს, ავზების პრიორიტეტსა და გაჭედილი შემწოვის შეტყობინებებს. მილსადენის მონიტორინგისთვის არსებობს მექანიკური და ელექტრონული დეტექტორები. კონტროლერი, დეტექტორი და დამატებითი ფუნქციები ცალკე შეირჩევა.

საწვავის ნარევები და შესრულების შერჩევა

სტანდარტული STP და ალკოჰოლთან თავსებადი STPAG/STPAP/IST/ISTAP განსხვავდება დაშვებული ნარევებით. კატალოგში სტანდარტული კლასი მოიცავს E10/B5-ს, შესაბამისი Alcohol Grade შესრულებები — E85-სა და B20/B100-ს. დამატებით მითითებულია 20% MTBE/ETBE ან 17% TAME; გამოყენებული ელასტომერები ფტორკაუჩუკის ნაერთია. მაქსიმალური სიბლანტეა 70 SSU, 15°C-ზე. საბოლოო დაშვება გადაამოწმეთ კონკრეტული კოდის დოკუმენტში.

ქარხნული ფოტოები და დეტალიზაცია

ფოტოს გასადიდებლად დააჭირეთ მას

სერიის საერთო ხედი
სერიის საერთო ხედი
მოთხოვნაზე მორგებული მიწოდება
Advanced Protection და MagShell — არჩევითი შესრულებები
EVO/TPI — დისტანციური მართვის შესაძლებლობები
სერიის საერთო ხედი
Advanced Protection და MagShell — არჩევითი შესრულებები
Advanced Protection და MagShell — არჩევითი შესრულებები
წყლისა და მჟავე ნარჩენების გამოყოფა
რას ფილტრავს და როგორ იწმინდება
მართვა და გაჟონვის მონიტორინგი
მოთხოვნაზე მორგებული მიწოდება
ფიქსირებული სიჩქარის ტუმბოს მართვა
მოთხოვნაზე მორგებული მიწოდება
მოთხოვნაზე მორგებული მიწოდება
ჰიდრავლიკური სისტემის შესაძლებლობები
ჰიდრავლიკური დარტყმა და ენერგიის ხარჯი
EVO/TPI — დისტანციური მართვის შესაძლებლობები
დანიშნულება და მუშაობის პრინციპი
დანიშნულება და მუშაობის პრინციპი
დანიშნულება და მუშაობის პრინციპი
კომპონენტები და სამონტაჟო ზომები
ქარხნული წარმადობის დიაგრამა4 Inch Performance Chart - 2 Hp Variable Speed Pump Performance Chart
ქარხნული წარმადობის დიაგრამა4 Inch Performance Chart - 2 Hp Fixed Speed Pump Performance Chart
ქარხნული წარმადობის დიაგრამა4 Inch Performance Chart -2 Hp High Pressure Fixed Speed Pump Performance Chart
ქარხნული შეკვეთისა და კომპლექტაციის სქემა
STP-ის მექანიკური ნაწილები და კოლექტორი
ორი ტუმბო ერთ ავზზე
ტუმბოს მომზადება მონტაჟისთვის
სად დგას ტუმბო და სად მიდის საწვავი
MLD და რამდენიმე ტუმბოს შეთანხმებული მართვა

აღწერაში სერიის საერთო და არჩევითი შესაძლებლობებიც არის მოცემული. კონკრეტული მოდელის კომპლექტაცია შეამოწმეთ მის ცხრილსა და დოკუმენტში.

საწყისი აღწერა და კომპლექტაცია — STPMVS2-VL1

მწარმოებლის მონაცემები (ინგლისურად)

2 Hp Variable Speed Submersible Turbine Pumps

ModelSTPMVS2-VL1
Description2 Hp variable speed with MagShell®
Model Length Range NumberVL1
Model Length Range*59" – 87"
სერიის მონაცემები და დოკუმენტები — მწარმოებლის მონაცემები (ინგლისურად)

1. Manhole

2. Leak Detector

3. Manifold

4. Containment Sump

5. 4" Riser

6. Tank Adapter

7. Tank Manway

8. Column Pipe

9. Variable Length Coupler

10. Pump Motor Assembly (PMA)

11. End bell

12. Line Test Port, ¼" NPT

13. Leak Detector Port, 2" NPT

14. Syphon Port, ¼" NPT

15. Tank Port, ¼" NPT

16. Riser Pipe, 4" NPT

17. Discharge Outlet, 2" NPT

Notes: 1. Effective tank diameter (ETD) = Inside tank diameter (to top of 4" bung), including tank manway and/or sump adapter.

2. Model length (A) = ETD plus riser length minus bottom clearance minus 1" thread engagement.

3. Riser length (B) = Bury depth (to top of tank) minus pump head clearance minus tank manway and/or minus sump adapter.

Variable SpeedWith faster fill times during peak hours and power savings during non-peak hours, variable speed submersible pumping systems allow you to maximize profits with consistent flow rates while mitigating operating expenses.

Biofuel Blend CompatibilityFE PETRO® pumps are UL listed with both UL79A (up to 85% Ethanol) and UL79B (up to 20% or 100% Biodiesel).

Advanced ProtectionStop corrosion in its tracks. Special powder-coated, e-coated, and stainless steel components defend your pump in the tank and in the sump from accelerated corrosion.

Turbine Pump InterfaceRemote enhanced pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.

Intake Filter ScreenAvoid system damage, pumping slowdowns, and reduce filter changes by keeping harmful tank debris, sediment, and corrosion from entering the pumping system with this factory-installed option.

MagShell®The patented stainless steel MagShell® is designed to maximize flow rate capabilities, potential throughput, and profits. By expanding the pump motor shell, the MagShell® increases the area for product flow by 45%.

Variable LengthThe patented telescoping pump shaft lets installers adjust the length of the pump onsite for the perfect fit.

Active Air EliminatorFE PETRO® STPs come standard with active air elimination, which eliminates air through the highest point in the pump head at all times when the pump is running, assuring air does not pass into discharge piping.

Safety and Ease of MaintenanceFE PETRO® STPs include a contractor electrical disconnect, which requires loosening only one bolt, allowing motor wiring to be disconnected without venting the dangerous tank vapors into the sump when servicing FE PETRO® submersible products.

Simple ServicingIf ever required, the pump can be easily removed from the tank by unthreading three bolts. There is no need to disconnect the syphon system or to remove the leak detector from the system to service the STP.

Manual Pressure ReliefAs a standard FE PETRO® feature, a vent screw is provided to bleed line pressure to zero when necessary. By turning this screw, product is diverted back to the tank, dropping line pressure to zero. This reduces fuel discharged into the sump manhole or dispenser pan during servicing, further protecting service technicians and the environment.

Outlast, Outperform with Franklin Electric InsideFE PETRO® STPs are powered by the legendary Franklin Electric motor and built for long term performance. Franklin Electric-powered submersible pumps provide maximum uptime and a proven track record in the fueling industry that spans more than four decades. They feature best-in-class flow rates and a long history of dependability.

Quality CertificationFranklin Fueling Systems is an ISO 9001 Certified Manufacturer.

Variable speed models are available in variable lengths only.

Fixed speed models are available in variable length and fixed length options.

Check valve: 2¾" (70mm) diameter fluorocarbon seal constructed with cast aluminum body and steel backing washer.

Pressure relief valve: available in four pressure relief settings, integral to check valve. Standard model relieves at 40 psi (2.8 bar) and resets above 35 psi (2.4 bar).

Syphon: venturi-type syphon primer supplied with every submersible. Syphon check valve and secondary syphon sold separately.

Air eliminator: every submersible includes a tank return path with one-way check valve to provide active air elimination.

Electrical disconnect: electrical yoke for positive contractor disconnect during service.

2 Hp, variable speed, two-stage centrifugal type pump motor with integral, automatic, thermal overload protection.

60 Hz Max. pressure: selectable operating pressure on MagVFC™ between 24 psi and 42 psi deadhead.

50 Hz Max. pressure: selectable operating pressure on EcoVFC™ between 1.65 bar and 2.90 bar deadhead.

Available with MagShell® which results in 45% increased flow area around motor.

2 Hp fixed speed, 3450 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection.

Standard pressure (M200, two-stage) model, max. pressure = 36 psi.

High pressure (HM200, three-stage) model, max. pressure = 45 psi.

Available with MagShell™ for 45% increased flow area around motor.

2 Hp fixed speed, 2875 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection.

Standard pressure (three-stage) model, max. pressure = 2.55 bar.

High pressure (four-stage) model, max. pressure = 3.03 bar.

Available with MagShell™ for 45% increased flow area around motor.

Max. liquid viscosity: 70 SSU at 60 °F (15 °C).

STP variable speed models are UL and cUL listed for fuel mixtures containing up to 10% ethanol, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.

STPAG (AG compatible) models are UL listed for fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.

All variable speed (non-AG) models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.

2 Hp fixed speed models can also be used with diesel fuels, fuel oils, kerosene, Avgas and jet fuels in a non-gelled pourable state.

All wetted elastomers are made of a high grade, fluorocarbon compound.

STP Standard Submersible Turbine Pumps with Fixed or Variable Speed Pump Motor Assembly

UL79 for petroleum dispensing products intended for use with gasoline or gasoline/ethanol blends with nominal ethanol concentrations up to 10 percent (gasohol, E10), diesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 5 percent (B5), kerosene, or fuel oil.

20% MTBE, 20% ETBE or 17% TAME with gasoline.

STPAG, STPAP, IST, ISTAP Alcohol-Grade Compatible and Advanced Protection Fixed or Variable Speed Submersible Turbine Pumps

UL79A for gasoline and gasoline/ethanol blends with nominal ethanol concentrations up to 85 percent (E0 - E85) for products intended for use with gasoline or gasoline/ethanol blends with nominal ethanol concentrations up to 85 percent (E85).

20% MTBE, 20% ETBE or 17% TAME with gasoline.

UL79B for diesel fuel, biodiesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 20 percent (B20), kerosene, and fuel oil for products intended for use with diesel fuel, biodiesel fuel, diesel/biodiesel blends with nominal biodiesel concentrations up to 20 percent (B20), kerosene or fuel oil.

100% biodiesel.

Variable speed pumps can only be controlled by a MagVFC™ variable frequency controller.

VS2 models can operate with single- or three-phase incoming power supply to the MagVFC™.

Incoming power supply to the MagVFC™ can be 200-250 VAC, 50 or 60 Hz.

MagVFC™ outputs a three-phase, variable frequency signal, valid for FE PETRO® variable speed pumps only.

MagVFC™ max. line draw: 20 Amps.

Max motor draw: 7 Amps.

Variable speed pumps can only be controlled by a MagVFC™ or EcoVFC™ variable frequency controller.

VS2 models can operate with single-phase incoming power supply to the MagVFC™ or three-phase to EcoVFC™.

Incoming power supply to the MagVFC™ is 200-250 VAC, 50 Hz and 360-440 VAC, 50 Hz to the EcoVFC™.

MagVFC™ or EcoVFC™ outputs a three-phase, variable frequency signal, valid for FE PETRO® variable speed pumps only.

MagVFC™ or EcoVFC™ max. line draw: 20 Amps.

Max motor draw: VS2 7 Amps.

2 Hp fixed speed models require single-phase, 208-230 VAC, 60 Hz incoming power.

2 Hp fixed speed models incorporate a starting and running capacitor, with internal bleed resistor, rated 370 Volt, 40 microfarad.

SPGC-220 single-phase Guardian Controllers and STP-CBS single-phase control boxes are available for 2 hp pump control.

Max. motor draw: 12 Amps.

200B models require single-phase, 200-250 VAC, 50 Hz incoming power and 200C models require three-phase 380-415 VAC 50 Hz incoming power.

200B models incorporate a starting and running capacitor, with internal bleed resistor, rated 440 Volt, 40 microfarad.

SPGC-220 single-phase Guardian™ Series controllers and STP-CBBS single-phase control boxes are available for 200B pump control.

STP-SCIIIC three phase smart controller and STP-CBB3C three-phase magnetic starter are available for 200C contol.

Max. motor draw: 200B 10 Amps, 200C 5 Amps.

cULus listed.

Consult factory for applicable approvals.

For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.

For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.

For 50 Hz performance charts, please see the 50Hz-Submersible Turbine Pumps-Datasheet in Downloads.

2 Hp Variable Speed Submersible Turbine Pumps

ModelDescriptionModel Length Range NumberModel Length Range*
STPMVS2-VL12 Hp variable speed with MagShell®VL159" – 87"
STPMVS2-VL22 Hp variable speed with MagShell®VL290" – 151"
STPMVS2-VL32 Hp variable speed with MagShell®VL3122" – 213"

2 Hp Variable Speed Intelligent Submersible Turbine Pumps

ModelDescriptionModel Length Range NumberModel Length Range*
ISTM-12 Hp AG variable speed with MagShell®VL159" – 87"
ISTM-22 Hp AG variable speed with MagShell®VL290" – 151"
ISTM-32 Hp AG variable speed with MagShell®VL3122" – 213"
ISTAPM-12 Hp AG variable speed with Advanced Protection, and MagShell®VL159" – 87"
ISTAPM-22 Hp AG variable speed with Advanced Protection, and MagShell®VL290" – 151"
ISTAPM-32 Hp AG variable speed with Advanced Protection, and MagShell®VL3122" – 213"

Standard 2 Hp Fixed Speed Submersible Turbine Pumps

ModelDescriptionModel Length Range NumberModel Length Range*
STPM200-VL12 Hp fixed speed with MagShell®VL163" – 91"
STPM200-VL22 Hp fixed speed with MagShell®VL294" – 154"
STPM200-VL32 Hp fixed speed with MagShell®VL3126" – 217"
STPHM200-VL12 Hp high pressure fixed speed with MagShell®VL163" – 91"
STPHM200-VL22 Hp high pressure fixed speed with MagShell®VL294" – 154"
STPHM200-VL32 Hp high pressure fixed speed with MagShell®VL3126" – 217"

Alcohol-Gas (AG) 2 Hp Fixed Speed Submersible Turbine Pumps

ModelDescriptionModel Length Range NumberModel Length Range*
STPAGM200-VL12 Hp AG fixed speed with MagShell®VL163" – 91"
STPAGM200-VL22 Hp AG fixed speed with MagShell®VL294" – 154"
STPAGM200-VL32 Hp AG fixed speed with MagShell®VL3126" – 217"
STPAGHM200-VL12 Hp AG high pressure fixed speed with MagShell®VL163" – 92"
STPAGHM200-VL22 Hp AG high pressure fixed speed with MagShell®VL294" – 155"
STPAGHM200-VL32 Hp AG high pressure fixed speed with MagShell®VL3126" – 218"
STPAPM200-VL12 Hp fixed speed with Advanced Protection, and MagShell®VL163" – 91"
STPAPM200-VL22 Hp fixed speed with Advanced Protection, and MagShell®VL294" – 154"
STPAPM200-VL32 Hp fixed speed with Advanced Protection, and MagShell®VL3126" – 217"
STPAPHM200-VL12 Hp high pressure fixed speed with Advanced Protection, and MagShell®VL163" – 92"
STPAPHM200-VL22 Hp high pressure fixed speed with Advanced Protection, and MagShell®VL294" – 155"
STPAPHM200-VL32 Hp high pressure fixed speed with Advanced Protection, and MagShell®VL3126" – 218"

Factory Installed Options

ModelDescription
FFloating suction adapter, 1½" NPT female, must be factory installed
KIFS (intake filter screen) factory assembled to pump motor assembly
RModel R check valve, factory installed, for Veeder-Root® PLLD Line Leak

2 Hp fixed speed specific accessories - 60Hz

Model NumberDescription
400137908Syphon check valve, alcohol-gasoline compatible (when ordered with STP/IST)
5874202800MagVFC™, 2 Hp or 4 Hp Variable Frequency Controller, 220 V, one required per STP
400818921STP-CBS, single-phase control box, with switch and lockout, 120 Volt coil
402312931STP-DHI + SPGC-220 Guardian Series™ Single-Phase Controller bundle (220 Volt supply, 110 Volt hook)
402313921STP-DHI-CBS, combo DHI with factory-wired STP-CBS single-phase control box
402459931Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible
402507930Secondary syphon kit (when two syphon primes are required for one STP)
5800100220SPGC-220 Guardian Series™ Single-Phase Controller, 220 Volt
5800300100STP-DHI, dispenser hook isolation for 110 Volt dispenser handle switches, up to eight each

2 Hp fixed speed specific accessories - 50Hz

Model NumberDescription
400137937Syphon check valve, alcohol-gasoline compatible
400818922STP-CBBS, single-phase control box, with switch and lockout, 240 Volt coil
401220965STP-CBB3C, three-phase 380-415 VAC magnetic starter
402312932STP-DHIB + SPGC-220 Guardian Series™ Single-Phase Controller bundle (220 Volt supply, 240 Volt hook)
402313922STP-DHIB-CBBS, combo DHI with factory-wired STP-CBBS single-phase control box
402459931Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible
402507930Secondary syphon kit (when two syphon primes are required for one STP)
5800100220SPGC-220 Guardian Series™ Single-Phase Controller, 220 Volt
5800300200STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each

Intelligent submersible turbine pump specific accessories - 60Hz

Model NumberDescription
5874202800MagVFC™, 2 Hp or 4 Hp Variable Frequency Controller, 220 V, one required per STP
400137908Syphon check valve, alcohol-gasoline compatible (when ordered with STP/IST)
5800300100STP-DHI, dispenser hook isolation for 110 Volt dispenser handle switches, up to eight each
402459931Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible
402507930Secondary syphon kit (when two syphon primes are required for one STP)

Intelligent submersible turbine pump specific accessories - 50Hz

Model NumberDescription
5874202900EcoVFC™, 2 Hp or 4 Hp Variable Frequency Controller, 380 V, one required per STP
400137937Syphon check valve, alcohol-gasoline compatible
402459931Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible
402507930Secondary syphon kit (when two syphon primes are required for one STP)
5800300200STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each
წყაროს გვერდი ↗ Franklin Electric Fueling Systems

პროდუქტის შესახებ

აღწერა

FE PETRO 2 Hp სერია აერთიანებს სიხშირულ და ფიქსირებული სიჩქარის შესრულებებს. ტელესკოპური სიგრძის ვარიანტები მონტაჟისას რეზერვუარის ზომაზე მორგებას ამარტივებს; AP და AG აღნიშვნები კონკრეტულ შესრულებას განასხვავებს. ცხრილიდან აირჩიეთ ზუსტი მოდელი: ფიქსირებული და სიხშირული ტუმბოების კვება და მართვის მოთხოვნები განსხვავდება.