QDX40-9-1.5C – Clean-water pump
Submersible clean-water pumps

QDX40-9-1.5C – Clean-water pump

1.5 kW · Hmax 9 m · Qmax 40 t/h (666.67 l/min)

Nameplate data

Maximum flow40 t/h · 666.6666666666666 l/min
Maximum head9 m
Power1.5 kW · 2 HP
MotorSingle-phase · 220 V · 50 Hz
Rotational speed3000 rpm
Rated current9 A
Capacitor35 µF · 450 V
Insulation classB
Protection classIP44
Operating dutyContinuous

Technical specifications

Select a value to find pumps with the same specification

Pump typeSubmersible – clean water
Maximum flow (Qmax)40 t/h · 666 l/min
Maximum head (Hmax)9 m
Power1.5 kW · 2 HP
Voltage / phase1 phase – 220V
Speed3000 rpm
Protection classIP44
Insulation classB
Frequency50 Hz
SKU QDX40-9-1.5C

Price

on request

Send an inquiry to receive prices and delivery terms within 1–2 days.

Send an inquiryContact us
+995 593 41 57 35+995 555 585 860+995 574 104 024
[email protected]
  • Official dealer for 20+ brands
  • Delivery in Georgia
  • 20+ years of experience

Series comparison

The entire series in one table

4 Model in one family, with head at each flow. The model you are viewing is highlighted in dark blue.

QDX C

This family
QDX C Family performance comparison
Modelt/h →l/min →Curve00350610091501220015250183002135024400274503050033550366003965040666.6742700457504880050833.33
QDX40-9-1.5CCurrent1.5 kW220 VApproximate98.958.88.548.197.737.186.525.764.93.942.871.710.440----
QDX50-10-2.2C2.2 kW220 VApproximate109.969.869.689.429.18.78.247.77.086.45.644.823.92-2.941.90.780
QDX15-18-1.5C1.5 kW220 VApproximate1817.2815.1211.526.480-------------
QDX10-15-0.75CPower not confirmedVoltage not confirmedCurve not entered yet
Table 1. QDX C – columns show flow in t/h, with l/min below; cells show head in metres.

Curves marked “approximate” are calculated from nameplate data and are not factory test results.Values are for reference. In a real system, pipe diameter, length and bends reduce the available head.

Technical sheet

Model QDX40-9-1.5C

Performance curve

A pump has a performance curve rather than a single flow and head. Qmax and Hmax are at opposite ends and never occur together: at maximum head, flow is zero; at maximum flow, head is zero. Actual operation lies between these extremes.

Hmax 9 mQmax40 t/h666.67 l/min0510t/h010203040l/min0200400600Head, mFlow
Maximum head
9m

At zero flow

Maximum flow
40t/h

666.67 l/min · at zero head

Midpoint
6.52m

21 t/h
350 l/minat

Chart 1. Head (m) against flow (t/h, l/min), QDX40-9-1.5C. No manufacturer's table is available for this model. The approximate curve is calculated from nameplate maximum head and flow. Move the pointer near the curve, or touch it on a phone, to read the head and flow at any point.

Calculated values (from nameplate)

Performance table
t/h
l/min
Head, m

Select a number in the table to see the corresponding point.

From the catalogue

Related products

All Submersible clean-water pumps →
QDX50-10-2.2C – Clean-water pump
QDX50-10-2.2C – Clean-water pump
Price on request
QDX15-18-1.5C – Clean-water pump
QDX15-18-1.5C – Clean-water pump
Price on request
QDX10-15-0.75C – Clean-water pump
QDX10-15-0.75C – Clean-water pump
Price on request
QDX1.5-32-0.75F – Clean-water pump
QDX1.5-32-0.75F – Clean-water pump
Price on request
QDX40-9-1.5C – Clean-water pump · PN.GE