FE PETRO DEF-PMA150 — AdBlue pump motor assembly – series illustration

Series illustration

FE PETRO DEF-PMA150 — AdBlue pump motor assembly

The stainless-steel FE PETRO DEF-PMA150 is designed for DEF / AdBlue (AUS 32). The 1½ Hp (1. Read more →

Model code (SKU)PN-FF-403383903
Model
DEF-PMA150A
Factory order code
403383903
brands
FE PETRO / Franklin Electric
Frequency
60 Hz
Phases
Single-phase
Power
1½ Hp / 1.1 kW
Nominal supply
208–240 VAC
Rated current
7.9 A
Outlet
2″ NPT
Capacitor
25 µF / 370 VAC
Outside diameter
130 mm
კაბელის სიგრძე
7 m / 10 m (FFS-0302)
Material
Stainless steel
Application
DEF / AdBlue / AUS 32

Price

on request

Send an inquiry to receive prices and delivery terms within 1–2 days.

Send an inquiryContact us
  • Official dealer for 20+ brands
  • Delivery in Georgia
  • 20+ years of experience

Select a model by clicking its data in the table.

Compare models

ModelPowerFrequency
1½ Hp / 1.1 kW60 Hz
1½ Hp / 1.1 kW60 Hz
1½ Hp / 1.1 kW50 Hz
1½ Hp / 1.1 kW50 Hz
Factory performance curve — 60 Hz
Factory performance curve — 60 Hz

This curve applies to the stated frequency and configuration. For 50 Hz use the corresponding document.

Construction, operation and model selection

Detailed description and use

System application and installation

Installed, grouped and component views

DEF pump in the tank: typical arrangement
PMA motor and hydraulic assembly

DEF pump in the tank: typical arrangement

The PMA hangs vertically from the column pipe and must be completely submerged. The manual’s typical bottom clearance is 3″ (76 mm); never suspend or lift it by its power cable. The bypass provides the minimum circulation required for motor cooling. The drawing identifies the check valve, bypass, gauge connection and dispenser outlet separately.

Flow direction and materials

The DEF check-valve arrow points upward from the PMA towards the outlet. The bypass discharge must not strike the power cable. Use DEF-compatible sealing material; the PMA replacement guide excludes PTFE tape. An optional Thermal Relief kit addresses thermal expansion and does not replace the required bypass relief valve.

Selecting the DEF-PMA electrical execution

DEF-PMA150A is single-phase 60 Hz; the guide specifies a 25 µF capacitor rated at least 370 V. DEF-PMA150B is single-phase 50 Hz with 30 µF, at least 440 V. C and D are three-phase and do not use that capacitor. Controller compatibility is separate: the guide addresses Guardian with firmware 3.8 or later in DEF mode; not every STP controller supports DEF.

Replacement part within the assembly

Use the exploded-view position to identify the exact part code; the context image shows where it works in the pump or control enclosure. Replacement checks code, sealing, dimensions and electrical rating. Avoid damaging new seals, wires or cables during assembly, then verify the relevant pressure or electrical function.

Full installation manuals and drawings

Consult the specific model’s factory manual for the complete installation/service sequence, connections and safety requirements.

DEF / AdBlue fluid and application

These pumps handle DEF/AdBlue, the ISO 22241-1 AUS32 solution of 32.5% urea in distilled/deionized water. DEF is not diesel fuel. The catalogue lists specific gravity 1.09 at 20°C. Stainless wetted parts and compatible elastomers help avoid contamination of the solution.

PMA motor and hydraulic assembly

DEF PMA has a 130 mm (5.1″) outside diameter. A stainless encapsulated motor, heavy-duty shaft and double mechanical seals separate the fluid from the oil-filled bearing chamber. Impellers, diffusers and connections are stainless. For vertical installation, discharge piping suspends the assembly clear of the tank bottom.

50/60 Hz hydraulics, cooling and valves

60 Hz models are two-stage with a 2″ NPT female outlet; 50 Hz models are three-stage with 2″ BSPT. Product flow cools the continuously rated motor. Required bypass opening pressure is 30–40 psi (2.1–2.8 bar), with minimum flow 4 gpm (about 15 L/min). Check-valve maximum cracking pressure is 3 psi (0.2 bar).

Cable execution and document version

The PMA webpage lists a 7 m plug-in cable with polyethylene jacket, while the revised document and complete-kit page specify a 10 m EPDM cable. These are differing source executions, not a promise that both cables are included. Confirm cable length and jacket against the current document for the ordered configuration.

Factory photos and details

Select an image to enlarge

PMA motor and hydraulic assembly
DEF pump in the tank: typical arrangement

Descriptions include series-wide and optional features. Check the selected model’s table and documents for its actual configuration.

Original description and contents — DEF-PMA150A

Manufacturer data (English)

Variable Length Diesel Exhaust Fluid Submersible Turbine Pump Replacement Kits - 60Hz

Model Number403383903
Description60 Hz, single phase pump motor assembly (DEF-PMA150A)

Fixed Length Diesel Exhaust Fluid Submersible Turbine Pump Kits - 60Hz

Model Number403383903
Description60 Hz, single phase pump motor assembly (DEF-PMA150A)
Series data and documents — Manufacturer data (English)

Materials: Stainless steel construction including impellers/diffusers, inlet/outlet , and outer shell

Pump type: All models are 5.1" (130 mm) outside diameter centrifugal type pump

Power cable: 23' (7m) black polyethylene jacketed plug-in power cable

60 Hz pump motor: Two-stage pump with 2" NPT female outlet

50 Hz pump motor: Three-stage pump with 2" BSPT female outlet

Motor rating: Continuous operation with motor cooling provided by product flow and protected from dry running

Bypass relief valve with cracking pressure of 30-40 psi (2.1-2.8 bar) and 4 gpm (15 lpm) minimum flow required at the discharge of all models.

Non-return check valve with maximum cracking pressure of 3 psi (0.2 bar) required between product piping and bypass relief valve of all models.

Liquid compatibility: All models are intended for use with Diesel Exhaust Fluid (DEF). DEF is a non-flammable, non-combustible liquid that has a specific gravity of 1.09 at 68˚F, and is made per ISO 22241-1 specifications with 32.5% urea and distilled or deionized water. As defined by ISO 22241-1, DEF is the same as AUS 32 (aqueous urea solution).

Source page ↗ Franklin Electric Fueling Systems

About this product

Description

The stainless-steel FE PETRO DEF-PMA150 is designed for DEF / AdBlue (AUS 32). The 1½ Hp (1.1 kW) assembly has a 130 mm outside diameter ; cable length depends on the supplied configuration. The 50 Hz version has three stages and a 2″ BSPT outlet; the 60 Hz version has two stages and a 2″ NPT outlet. Single- and three-phase models are distinct; consult the document for bypass and check-valve requirements.