FE PETRO TPGC — three-phase pump controller – series illustration

Series illustration

FE PETRO TPGC — three-phase pump controller

Guardian TPGC controls compatible 3 Hp and 5 Hp three-phase fixed-speed pumps. Its display shows operation and faults, with calibration and the last five abnormal conditions retained. Read more →

Model code (SKU)PN-FF-5800103220
Model
TPGC-220
Factory order code
5800103220
brands
FE PETRO / Franklin Electric
Phases
Three-phase
Nominal supply
220 V
Dispenser hook signal
110 V
Motor contact rating
5 Hp / 208–240 VAC / 60 Hz / 3-phase

Price

on request

Send an inquiry to receive prices and delivery terms within 1–2 days.

Send an inquiryContact us
  • Official dealer for 20+ brands
  • Delivery in Georgia
  • 20+ years of experience

Select a model by clicking its data in the table.

Compare models

Model

Construction, operation and model selection

Detailed description and use

System application and installation

Installed, grouped and component views

Control panel and connections
EVO/TPI remote-control capabilities
MLD and coordinated multiple-pump control

Where the controller is mounted

Choose mounting location and cabling from the specific controller manual. Guardian guides specify indoor, non-hazardous locations, not a sump containing fuel vapours. Provide grounding, secure enclosure mounting and cooling clearance. Motor, incoming supply, dispenser-hook and RS485 connections serve different functions.

Checks before commissioning

First match motor and controller type, voltage, phases and frequency. Verify wiring, grounding and motor-lead insulation. Fixed-speed Guardian uses its calibration procedure; a variable-frequency model also requires frequency-limit and control-setting checks. Commissioning then tests dispenser demand, stopping and fault response.

Controllers, EVO and communication

In a networked installation, RS485 coordinates compatible pumps and EVO/TPI monitoring; it does not replace motor power wiring. The manual defines addressing, operating mode and supported devices. Commissioning checks communication indication and received statuses. Network features are not automatically available on every standalone control box.

MLD and coordinated multiple-pump control

TB013 requires only one lead pump during an MLD test. Two independently running detectors can yield an approximately 6 gph combined threshold instead of preserving the individual 3 gph protection. The document names suitable alternating/primary-secondary modes for STP-SCI/SCIII, MagVFC, SPGC-220 and TPGC-380. The drawing is not automatically applicable to other models.

Pressure and reverse flow in grouped systems

TB013 specifies suitable STD check valves with approximately 40 psi factory relief settings. Additional series check valves must not obstruct pressure relief. With pumps exceeding 40 psi connected across separate tanks, fuel may transfer into another tank; the document calls for additional overfill-control measures for that case.

Full installation manuals and drawings

Consult the specific model’s factory manual for the complete installation/service sequence, connections and safety requirements.

Factory video guides

TPGC three-phase system data

TPGC serves compatible three-phase 3/5 Hp fixed-speed pumps. TPGC-220 motor contacts are rated 5 Hp / 208–240 VAC / 60 Hz with a 110 V dispenser signal. TPGC-380 is rated 5 Hp / 380 VAC / 50 Hz with a 220 V dispenser signal. Supply voltage and hook-signal voltage are different ratings.

Fixed-speed pump control

A fixed-speed Guardian switches the pump, monitors its electrical condition and records faults; it does not vary motor speed like a VFD. Automatic calibration learns the individual STP’s electrical characteristics. The last five abnormal conditions remain in non-volatile memory.

Panel, calibration and protection

The LCD presents run/fault status. Separate Reset and Silence/Calibrate buttons, a yellow communication LED and printed code references simplify diagnosis. Protection includes overvoltage and underload detection, improved relay and surge circuitry. RS485 links compatible systems and TPI.

EVO/TPI remote-control capabilities

Connection to a compatible EVO tank-gauge console enables remote status, history reporting and automated responses. Supported functions include pump-in-water prevention, clogged-intake escalation, overfill control, primary/secondary pump management and level-based priority adjustment. Compatible controller, console and configuration are required.

Factory photos and details

Select an image to enlarge

TPGC three-phase system data
Panel, calibration and protection
Panel, calibration and protection
Control panel and connections
Panel, calibration and protection
EVO/TPI remote-control capabilities
MLD and coordinated multiple-pump control

Descriptions include series-wide and optional features. Check the selected model’s table and documents for its actual configuration.

Original description and contents — TPGC-220

Manufacturer data (English)

Guardian Series™ Three Phase Pump Controller

Model Number5800103220
DescriptionTPGC-220 Guardian Series™ Three Phase Controller (220 Volt supply, 110 Volt hook)
Series data and documents — Manufacturer data (English)

Compatible with most FE PETRO® three phase 3 Hp and 5 Hp fixed speed STPs, as well as comparable competitive STPs.

3½" digital LCD provides readable running and fault status for quick troubleshooting.

Separate “Reset” and “Silence/Calibrate” push buttons provide clear interaction with the controller.

Automatically logs the last five abnormal conditions seen in the pumping system. This data is retained in non-volatile memory. Service technicians can quickly view a history of abnormal conditions, which is particularly useful when troubleshooting intermittent conditions.

Over voltage protection and enhanced underload detection protects pumping system equipment.

With a single press of the “Calibrate” button, the controller will automatically learn the electrical characteristics of the STP for easy setup or retrofit.

TPI Capabilities

Dimensions91/16" x 73/4" x 51/2" (230 mm x 196 mm x 140 mm)
Motor Contact RatingTPGC-220 rated 5 Hp, 208-240 VAC, 60 Hz, Three Phase TPGC-380 rated 5 Hp, 380 VAC, 50 Hz, Three Phase
Switch Hook Rating120-240 VAC, 50/60 Hz
Communication PortAn integrated RS 485 com port is provided to connect Guardian Series™ Controllers to EVO™ Series for enhanced functionality via Turbine Pump Interface (TPI).
Approvals/Certifications– ULc listed– CE certified– ISO 9001:2015 certified manufacturer

Guardian Series™ Three Phase Pump Controller

Model NumberDescription
5800103220TPGC-220 Guardian Series™ Three Phase Controller (220 Volt supply, 110 Volt hook)
5800103380TPGC-380 Guardian Series™ Three Phase Controller (380 Volt supply, 220 Volt hook)

Replacement Parts

Model NumberDescription
225000932SPGC-220 upper (user input) replacement board
223689931TPGC-380 Lower (Power) Board
223689930TPGC-220 Lower (Power) Board
228727102Contactor, 3PST-NO (220VAC Coil)
Source page ↗ Franklin Electric Fueling Systems

About this product

Description

Guardian TPGC controls compatible 3 Hp and 5 Hp three-phase fixed-speed pumps. Its display shows operation and faults, with calibration and the last five abnormal conditions retained. Check TPGC-220 and TPGC-380 supply, hook signal and frequency separately.