FE PETRO Guardian VFC — variable frequency controller

Series illustration

FE PETRO Guardian VFC — variable frequency controller

Guardian VFC controls FE PETRO variable-speed pumps, displays operating and fault codes and supports RS485 communication. Supply frequency and motor output frequency are separate ratings; the listed 50/60 Hz input must not be confused with the 70 Hz output rating.

Technical specifications

Model code (SKU)PN-FF-5874202220
Model
Guardian VFC 220
Factory order code
5874202220
brands
FE PETRO / Franklin Electric
Frequency
60 Hz
Nominal supply
200–250 VAC
Input frequency
50/60 Hz
Output frequency
70 Hz
Display
LED
კომუნიკაცია
RS485

Price

on request

Send an inquiry to receive prices and delivery terms within 1–2 days.

Send an inquiryContact us
  • Official dealer for 20+ brands
  • Delivery in Georgia
  • 20+ years of experience

Construction, operation and model selection

Detailed description and use

System application and installation

Installed, grouped and component views

Variable versus fixed-speed demonstrationFactory demonstration of simultaneous dispenser demand and control modes, not a measured test report for a particular site.
Checks before commissioning
Where the controller is mounted
Protection, interface and connections

Where the controller is mounted

Choose mounting location and cabling from the specific controller manual. Guardian guides specify indoor, non-hazardous locations, not a sump containing fuel vapours. Provide grounding, secure enclosure mounting and cooling clearance. Motor, incoming supply, dispenser-hook and RS485 connections serve different functions.

VFGC-220 extended electrical ratings

The VFGC-220 guide rates input at 200–250 VAC, 50/60 Hz: 19 A single-phase or 18 A three-phase. Motor output is three-phase 190 VAC / 70 Hz, with 9.5 or 16 FLA depending on input. Hook rating is 120–240 VAC / 16 mA; weight 9.2 kg and ambient range 4–50°C. These ratings belong to VFGC-220, not every MagVFC/EcoVFC.

Checks before commissioning

First match motor and controller type, voltage, phases and frequency. Verify wiring, grounding and motor-lead insulation. Fixed-speed Guardian uses its calibration procedure; a variable-frequency model also requires frequency-limit and control-setting checks. Commissioning then tests dispenser demand, stopping and fault response.

Controllers, EVO and communication

In a networked installation, RS485 coordinates compatible pumps and EVO/TPI monitoring; it does not replace motor power wiring. The manual defines addressing, operating mode and supported devices. Commissioning checks communication indication and received statuses. Network features are not automatically available on every standalone control box.

Full installation manuals and drawings

Consult the specific model’s factory manual for the complete installation/service sequence, connections and safety requirements.

Factory video guides

Guardian VFC control and diagnostics

Guardian VFC serves FE PETRO 2/4 Hp variable-speed pumps. Its 3½-digit LCD shows operating and fault status, retaining the last five faults. Reset and Silence buttons, a communication LED and front-panel codes aid operation. A centralized heatsink/fan and temperature monitoring provide cooling.

Demand-based delivery

Frequency control changes pump speed with the number of active dispensers. It reduces motor power at low demand and raises speed during peaks, helping maintain steadier delivery. Actual performance depends on the pump, piping and selected operating pressure.

Hydraulic hammer and energy use

Abrupt flow interruption can cause a pressure surge. Speed regulation limits excess pressure and reduces stress on valves, detectors and dispenser components. Matching power to demand can lower energy use at partial load; no fixed saving percentage is specified.

Protection, interface and connections

Features include overvoltage and underload detection, motor-phase diagnostics, input surge protection and an output-noise filter. Internal interfaces include RS485 terminals, USB service port, frequency limit switch, rotary selector and SW1/SW2/SW3 option switches, with separate motor, supply and dispenser-hook connections.

EVO/TPI remote-control capabilities

Connection to a compatible EVO tank-gauge console enables remote status, history reporting and automated responses. Supported functions include pump-in-water prevention, clogged-intake escalation, overfill control, primary/secondary pump management and level-based priority adjustment. Compatible controller, console and configuration are required.

Factory photos and details

Select an image to enlarge

Guardian VFC control and diagnostics
Demand-based delivery
Hydraulic system capability
Panel, calibration and protection
Hydraulic hammer and energy use
Protection, interface and connections
Guardian VFC control and diagnostics
Protection, interface and connections
Control panel and connections
4 Hp variable-speed pumping
EVO/TPI remote-control capabilities
Control panel and connections
Control panel and connections
Control panel and connections
Variable versus fixed-speed demonstration
Checks before commissioning
Where the controller is mounted

Descriptions include series-wide and optional features. Check the selected model’s table and documents for its actual configuration.

Original description and contents — Guardian VFC 220

Manufacturer data (English)

Guardian Series™ Variable Frequency Controller

Model Number5874202220
DescriptionGuardian Series™ Variable Frequency Controller, 60 Hz, 220 V
Series data and documents — Manufacturer data (English)

*For use with FE PETRO® variable speed pumps only.

1. User interface display

2. Alarm silence button

3. Controller reset button

4. RS485 activity indicator LED

5. Fault codes

6. Rotary select switch

7. SW3 option select switch

8. SW2 option select switch

9. SW1 option select switch

10. RS485 comm. terminals

11. Frequency limit switch

12. Motor output terminal

13. Incoming power terminal

14. Incoming dispenser hook

15. USB service port

16. Cooling fan

Power Requirements

2 Hp Submersible PumpsSingle-phase incoming power
2 Hp & 4 Hp Submersible PumpsThree-phase incoming power
Incoming Power Supply200-250 VAC
Max. Line Draw20 Amps
OutputThree-phase, variable frequency signal*
2 Hp Max. Motor Draw9 Amps
4 Hp Max. Motor Draw15 Amps
Single Phase Input Max. Current9.5 Amps
Three Phase Input, VS2 Max. Currentt11.5 Amps
Three Phase Input, VS4 Max. Current16 Amps

Environmental

Dimensions15.61" H x 5.3" W x 10.1" D
Minimum mounting clearance envelope24.6" H x 14.3" W
Weight20.2 lbs.
LocationNon-hazardous environment, indoors where explosive or flammable vapors are not present
AltitudeUp to 2,000 m
Temperature40° F to 122° C (4° C to 50° C)
Humidity0–95%, non-condensing
OvervoltageUL 61800-5-1 CATEGORY III
PollutionUL 61800-5-1 DEGREE 2
Enclosure type ratingUL Type 1
Approvals / certificationsUL / ULc listed, ISO 9001:2015 certified manufacturer

Ratings

Single phase input rating200 - 250 VAC, 50/60 Hz, 19 A, 1-phase
Three phase input rating200 - 250 VAC, 50/60 Hz, 18 A, 3-phase
Single phase output rating190 VAC, 70 Hz, 9.5 FLA, 3-phase
Three phase output rating190 VAC, 70 Hz, 16 FLA, 3-phase
Switch hook120 - 240 VAC, 50 / 60 Hz, 16 mA
Supply / motor wiring10 - 12 AWG (2.5 - 6.0 mm²), 90° C, 300 V minimum
Supply hook wiring10 - 18 AWG (0.75 - 6.0 mm²), 90° C, 300 V minimum

Communication

User interface display7 segment, 31/2-digit LED screen
Activity indicator lightYellow RS485 LED light
Communication terminalRS485
Service portUSB for temporary use by service personnel only

Guardian Series™ Variable Frequency Controller

Model NumberDescription
5874202220Guardian Series™ Variable Frequency Controller, 60 Hz, 220 V
Source page ↗ Franklin Electric Fueling Systems

About this product

Description

Guardian VFC controls FE PETRO variable-speed pumps, displays operating and fault codes and supports RS485 communication. Supply frequency and motor output frequency are separate ratings; the listed 50/60 Hz input must not be confused with the 70 Hz output rating.