MP 150 – Peripheral pump
Peripheral surface pump · 220V / 50Hz · 1" · 5 models
Nameplate data
| Maximum flow | 4.5 t/h · 75 l/min |
|---|---|
| Maximum head | 90 m |
| Maximum suction lift | 8 m |
| Connection (inlet × outlet) | 1" × 1" |
| Power | 1.5 kW · 2 HP |
| Motor | Single-phase · 220 V · 50 Hz |
| Rotational speed | 2850 rpm |
| Rated current | 10.5 A |
|---|---|
| Maximum consumption | 2200 W |
| Capacitor | 50 µF · 450 V |
| Insulation class | B |
| Protection class | IP44 |
| Operating duty | Continuous |
Technical specifications
Select a value to find pumps with the same specification
| Pump type | Surface – peripheral |
| Maximum flow (Qmax) | 4.5 t/h · 75 l/min |
| Maximum head (Hmax) | 90 m |
| Suction lift | 8 m |
| Power | 1.5 kW · 2 HP |
| Voltage / phase | 1 phase – 220V |
| Speed | 2850 rpm |
| Protection class | IP44 |
| Inlet (suction) | 1" (25 mm) |
| Outlet (discharge) | 1" (25 mm) |
| Insulation class | B |
Additional model data
| Current | 10.5 A |
| Voltage | 220 V / 50 Hz |
| Connector | 1" × 1" |
Price
on request
Send an inquiry to receive prices and delivery terms within 1–2 days.
Send an inquiryContact us- Official dealer for 20+ brands
- Delivery in Georgia
- 20+ years of experience
Series comparison
The entire series in one table
5 Model in one family, with head at each flow. The model you are viewing is highlighted in dark blue.
PM
This family| Modelt/h →l/min → | Curve | 00 | 0.35 | 0.610 | 0.915 | 1.220 | 1.525 | 1.830 | 2.135 | 2.440 | 2.745 | 350 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| QB600.37 kW220 V | 35 | 30 | 25 | 20 | 15 | 10.5 | 6.5 | 3 | - | - | - | |
| QB700.75 kW230 V | 55 | 49 | 43 | 37 | 30 | 23 | 17 | 12 | 8 | 5 | - | |
| QB800.75 kW220 V | 65 | 59 | 52 | 45 | 38 | 31 | 25 | 19 | 14 | 10 | 7 | |
| QB1000.75 kW220 V | 80 | - | 69 | - | 56 | - | 42 | - | 26 | - | - | |
| QB150Current1.5 kW220 V | 90 | - | 80 | - | 64 | - | 48 | - | 30 | - | - |
Source: manufacturer's technical sheet.Values are for reference. In a real system, pipe diameter, length and bends reduce the available head.
Technical sheet
Model QB150
Performance curve
A pump has a performance curve rather than a single flow and head. Qmax and Hmax are at opposite ends and never occur together: at maximum head, flow is zero; at maximum flow, head is zero. Actual operation lies between these extremes.
- Maximum head
- 90m
- Maximum flow
- 2.4t/h
- Midpoint
- 64m
At zero flow
40 l/min· at 30 m
1.2 t/h ·
20 l/minat
Measured values
| t/h | |||||
|---|---|---|---|---|---|
| l/min | |||||
| Head, m |
Select a number in the table to see the corresponding point.
Surface pumps 220V
MP 150 – Peripheral pump
Peripheral surface pump · 220V / 50Hz · 1" · 5 models
Nameplate data
| Maximum flow | 4.5 t/h · 75 l/min |
|---|---|
| Maximum head | 90 m |
| Maximum suction lift | 8 m |
| Connection (inlet × outlet) | 1" × 1" |
| Power | 1.5 kW · 2 HP |
| Motor | Single-phase · 220 V · 50 Hz |
| Rotational speed | 2850 rpm |
| Rated current | 10.5 A |
| Maximum consumption | 2200 W |
| Capacitor | 50 µF · 450 V |
| Insulation class | B |
| Protection class | IP44 |
| Operating duty | Continuous |
Technical specifications
| Pump type | Surface – peripheral |
|---|---|
| Maximum flow (Qmax) | 4.5 t/h · 75 l/min |
| Maximum head (Hmax) | 90 m |
| Suction lift | 8 m |
| Inlet (suction) | 1" (25 mm) |
| Outlet (discharge) | 1" (25 mm) |
| Current | 10.5 A |
| Voltage | 220 V / 50 Hz |
| Connector | 1" × 1" |
Performance curve (Q–H)
Performance table
| Model | Q (t/h) | 0 | 0.6 | 1.2 | 1.8 | 2.4 |
|---|---|---|---|---|---|---|
| Q (l/min) | 0 | 10 | 20 | 30 | 40 | |
| MP 150 | H (m) | 90 | 80 | 64 | 48 | 30 |
Q: flow; H: head at the corresponding flow. Full PM series on pn.ge.